Setting your Trace Auto Gen Start Parameters

[davidbrady]

Hi Al,

Those values look fine. Keep watching, maybe you can collect data when it's in the questionable condition.

The MC2 inverters are a special Trace firmware release for motorhomes. They give priority to the AC2 connection which is the generator connection over the AC1 connection which is the shore power. This means when you start your generator the internal transfer switch drops shore power and transfers the loads over to generator power. It's all done seamlessly. The way it works is the inverter is already frequency synced to shore power, when the generator starts loads are transferred to inverter power while the inverter locks onto and syncs with the generator frequency. When the inverter power is locked onto the generator frequency and phase, then the inverter backs off and loads are powered by the generator. There's no hiccup in power delivery - seamless!