Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Setting your Trace Auto Gen Start Parameters
02-17-2019, 22:39 (This post was last modified: 02-17-2019 22:40 by davidbrady.)
Post: #18
RE: Setting your Trace Auto Gen Start Parameters
Most coaches at this age need suspension bushings. At a minimum you probably need anti-sway bar dog leg bushings. These are notorious for wearing out early. Also, I'd probably dig in and replace all the shock absorbers. Just put OEM back on. They're good for around 40K miles. Some folks go to Koni's but I think they're too stiff. It's always a compromise between handling and ride and I always trade off for a good quality ride. Your preferences may differ.

Also, if you have Prevost adjust the ride height be sure to check your owners manual for the proper height and insist they set it to that height. They often don't get this right!

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"there is no perfect forum there are only perfect forums"
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Setting your Trace Auto Gen Start Parameters - davidbrady - 02-17-2019 22:39



User(s) browsing this thread: 3 Guest(s)