Setting your Trace Auto Gen Start Parameters

[cubeman]

Chuck , here is what I found out about this . The Genny is the primary source of Electric on a Trace. So when I plugged in the Batteries were low as you said and the invertor sent a message to the Genny to help out . So the Genny started up.
So I took the genny auto off line and all was fine in the morning and the batts are now in float charge . I was able to prove this by resetting the auto Genn to on again and all is good . Man is this a cool set up .

Next I need to review what David said and check the setting on the inverter so I can be sure these new Lifeline batts do not become toast . Thank you for responding it is the only way we all can learn and benefit I believe .