Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
curves and angles
11-14-2018, 19:07 (This post was last modified: 11-14-2018 19:09 by davidbrady.)
Post: #31
RE: curves and angles
Ernie, my wife reminds me of that fact everyday! LOL! Thanks for the flooring guidance. I'm checking the bus to see if I can fit a 5/8" thick board. Most of the unfinished stuff comes in that thickness. The good news is they typical have a 4.7mm wear layer. Since I prefer a more rustic look I may get away with a light sanding of my 175 sq ft of finished flooring. Yes, I'll do the finishing and oiling.

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"there is no perfect forum there are only perfect forums"
Find all posts by this user
Like Post Quote this message in a reply
11-14-2018, 19:47
Post: #32
RE: curves and angles
please do not get any wide boards- I had a client bring his own material- 8 3/4 wide. Impossible to work with in a coach
Find all posts by this user
Like Post Quote this message in a reply
03-22-2019, 07:57
Post: #33
RE: curves and angles
drop down floor- Newell
and a curve


Attached File(s) Thumbnail(s)
İmage İmage İmage

Ernie Ekberg
97 Liberty Classic
Find all posts by this user
Like Post Quote this message in a reply
03-22-2019, 10:24
Post: #34
RE: curves and angles
Love it Ernie. The seam for the slide floor is remarkable. Remarkably invisible that is!

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"there is no perfect forum there are only perfect forums"
Find all posts by this user
Like Post Quote this message in a reply
03-22-2019, 18:53
Post: #35
RE: curves and angles
check out the gaps on a new Newell:


Attached File(s) Thumbnail(s)
İmage İmage

Ernie Ekberg
97 Liberty Classic
Find all posts by this user
Like Post Quote this message in a reply
[-] The following 2 users Like Ernie Ekberg's post:
davidbrady (03-23-2019), travelite (03-23-2019)
03-23-2019, 10:10
Post: #36
RE: curves and angles
Huge difference. Factory installed floors have never impressed, have they? I don't know why they can't take the time - they just seem to rush it with big gaps everywhere!

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"there is no perfect forum there are only perfect forums"
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)