Generator Auto-Start
|
07-07-2017, 22:27
(This post was last modified: 07-07-2017 22:28 by cmillsap.)
Post: #1
|
|||
|
|||
Generator Auto-Start
We just entered The Wild Horse Hotel and Casino’s RV park this afternoon. We weren’t here for more than 2 hours when the park's power grid failed. My neighbor said it’s a daily occurrence and lasts for 1 hour to 4 hours.
I’m glad I didn’t have my Gen Auto-Start turned on as all four a/c s were running. I’m not a big fan of leaving the Generator Auto-Start function on. Here’s why; A generator should be started with little or no amp load on it. Once started and running for a short warm up period, the load should be slowly added. The same procedure should be used when shutting down a generator. IOW, systematically lower the load before shutting down the generator. If I have a shore power failure, my four A/C units SMX thermostats will restart all the powered-on A/Cs once the power is re-supplied by the generator. If all 4 A/C units were running before the power failure plus some other small stuff plus the inverters, the initial amp load on the generator would be extremely high. If I have shore power failure, I would rather start the generator manually and add the loads one at a time. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Generator Auto-Start - cmillsap - 07-07-2017 22:27
RE: Generator Auto-Start - travelite - 07-08-2017, 01:24
RE: Generator Auto-Start - cmillsap - 07-08-2017, 13:21
RE: Generator Auto-Start - davidbrady - 07-08-2017, 15:08
RE: Generator Auto-Start - cmillsap - 07-09-2017, 14:22
RE: Generator Auto-Start - CC_Guy - 07-09-2017, 09:01
RE: Generator Auto-Start - davidbrady - 07-09-2017, 21:12
RE: Generator Auto-Start - CC_Guy - 07-09-2017, 23:19
RE: Generator Auto-Start - cmillsap - 07-10-2017, 00:46
|
User(s) browsing this thread: 1 Guest(s)