Coolant System Leaks

[Hisham Amaral]

(04-24-2017 18:42)travelite Wrote:  Thanks Hish, I appreciate the added info. You're absolutely correct, the Breeze clamps have that visual clamping reference which you describe. Thanks for reminding me!

Installation
A torque wrench should be used for proper
installation. The recommended torque is 90 to
100 lbf•in. (10 to 11 N•m). The Belleville spring
washer stacks should be nearly collapsed flat
and the screw tip should extend ¼" (6 mm)
beyond the housing (Fig. 3).
FIGURE 3: CONSTANT-TORQUE CLAMP 05037
Caution: The hose clamps will break if overtorqued.
Do not over-tighten, especially duri