Setting your Trace Auto Gen Start Parameters

[Jerry_94110]

Thanks Dave, it is now making sense why to set "Set Grid Amps AC" to 47A.

This is how I am shutting down the coach.

1. I turn off both inverters. Menu 1, toggle over to "off"
2. I switch of the DC power switch which is located at the top on the same panel as the inverter, generator gauges and holding tank level monitors.
3. I switch off both switch in the engine compartment. One is a sliding level and the other is a rotating switch.
4. I switch off both breakers (see picture)

To power back on, I reverse my steps.

Regarding item 3 above. Are these the DC switches that should be switched off at the same time?

Appreciate all your great advice.