Prevost Gurus - the Member Funded Prevost Forum / Discussions / Interior / curves and angles

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
curves and angles
11-14-2018, 19:07 (This post was last modified: 11-14-2018 19:09 by davidbrady.)
Post: #31
davidbrady Offline
Senior Member
****
 		Posts: 595
Likes Given: 51
Likes Received: 32 in 26 posts
Joined: Aug 2014
Reputation: 4
RE: curves and angles
Ernie, my wife reminds me of that fact everyday! LOL! Thanks for the flooring guidance. I'm checking the bus to see if I can fit a 5/8" thick board. Most of the unfinished stuff comes in that thickness. The good news is they typical have a 4.7mm wear layer. Since I prefer a more rustic look I may get away with a light sanding of my 175 sq ft of finished flooring. Yes, I'll do the finishing and oiling.
david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"there is no perfect forum there are only perfect forums"
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
curves and angles - Ernie Ekberg - 09-26-2018, 07:48
RE: curves and angles - davidbrady - 09-26-2018, 11:07
RE: curves and angles - Ernie Ekberg - 09-26-2018, 19:23
RE: curves and angles - Ernie Ekberg - 09-28-2018, 19:24
RE: curves and angles - davidbrady - 09-29-2018, 11:15
RE: curves and angles - Ernie Ekberg - 09-29-2018, 19:05
RE: curves and angles - davidbrady - 09-29-2018, 20:04
RE: curves and angles - Ernie Ekberg - 09-30-2018, 08:44
RE: curves and angles - davidbrady - 09-30-2018, 10:30
RE: curves and angles - Ernie Ekberg - 09-30-2018, 18:57
RE: curves and angles - davidbrady - 10-01-2018, 00:05
RE: curves and angles - davidbrady - 10-02-2018, 10:58
RE: curves and angles - Ernie Ekberg - 10-02-2018, 19:06
RE: curves and angles - davidbrady - 10-03-2018, 11:24
RE: curves and angles - Ernie Ekberg - 10-03-2018, 19:05
RE: curves and angles - davidbrady - 10-04-2018, 20:10
RE: curves and angles - Ernie Ekberg - 10-05-2018, 08:08
RE: curves and angles - Ernie Ekberg - 10-09-2018, 19:13
RE: curves and angles - travelite - 10-09-2018, 23:03
RE: curves and angles - Ernie Ekberg - 10-10-2018, 19:05
RE: curves and angles - Ernie Ekberg - 10-11-2018, 18:56
RE: curves and angles - davidbrady - 10-11-2018, 23:22
RE: curves and angles - Ernie Ekberg - 10-12-2018, 18:58
RE: curves and angles - davidbrady - 10-13-2018, 12:36
RE: curves and angles - Ernie Ekberg - 10-14-2018, 08:38
RE: curves and angles - Ernie Ekberg - 10-14-2018, 19:12
RE: curves and angles - Ernie Ekberg - 10-16-2018, 19:10
RE: curves and angles - davidbrady - 10-16-2018, 22:08
RE: curves and angles - davidbrady - 11-14-2018, 01:47
RE: curves and angles - Ernie Ekberg - 11-14-2018, 09:00
RE: curves and angles - davidbrady - 11-14-2018 19:07
RE: curves and angles - Ernie Ekberg - 11-14-2018, 19:47
RE: curves and angles - Ernie Ekberg - 03-22-2019, 07:57
RE: curves and angles - davidbrady - 03-22-2019, 10:24
RE: curves and angles - Ernie Ekberg - 03-22-2019, 18:53
RE: curves and angles - davidbrady - 03-23-2019, 10:10
RE: curves and angles - Ernie Ekberg - 05-23-2019, 09:37
RE: curves and angles - Ernie Ekberg - 11-08-2020, 10:10
RE: curves and angles - davidbrady - 11-14-2020, 16:12
RE: curves and angles - Hisham Amaral - 11-18-2020, 12:30



User(s) browsing this thread: 1 Guest(s)

Contact Us | Prevost Gurus - Free Classifieds & Support Forum Community Service | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication